重建/拆除/拆墙

拆除结构内部墙体的过程。

拆墙

建议工具

• 撬棍
• 锤子
• 铲子
• 手推车

建议的个人防护装备

• 3M 半面式呼吸器，配备 P100 滤芯
• 手套
• 靴子
• 泰维克服（可选）
• 安全眼镜（可选）

石膏板

开始前

    *Get your suggested tools. 
    *Plan where you will put the debris. 
    *Use dropcloths to protect the floor coverings. 
    *Cut off the power to any electrical in the wall.

准备就绪时

    Remove the doors 
    Remove the trim 
    Remove the drywall by knocking holes in it and pulling it off
    Knock the studs out one at the time and 
     then remove your top and bottom plate
    Remove any electrical by tracing it back 
     to where it originates from and safely leave it in an electrical box.

提示

    you can reduce the mess by cutting along the center of the 
     wall studs with a sharp knife. You only need to cut through the paper. 
    All the way through will reduce the mess even further.

木板

之前

  Ask yourself questions like.
    What is this paneling applied to?
    Does it have sheetrock or something behind it
    was it attached directly to the studs? 
    Also, are you attempting to salvage the paneling 
      or will you simply throw it away? 
     (If it was applied with an adhesive, plan on not being able to salvage it!) ==

准备就绪

     Start removing the paneling
     If it was just nailed, start at a joint 
       and work it loose with a small pry bar or a stiff putty knife
       Once the first panel is off of each wall, 
       the rest are easier since you can get to the edge easier.